CHAPTER 5Console Commands298Figure 341. Send New Firmware Image File to the A850Note: The transmission of the firmware image file should havebeen successfully executed if the “file send” window hasdisappeared again and no transmission error is displayed inthe console dialogue.Note: After a successful firmware upgrade, you have to rebootyour A850 anew so that the new firmware will be activated.In any case, after a firmware upgrade, you have also to enterdate and time anew; otherwise, please adhere to theupgrade instructions (“read me.txt”) accompanying yournew firmware.----------------------------Console Dialog End-----------------------------ConfigurationConfiguration Quick setupIn Quick setup, the setup of the A850 is performed only with themost important information, i.e. only the information is necessarywhich is required for the internal LAN operation of the A850 wherethe A850 independently establishes the IP addresses and activatesits DCHCP server function.Note: In order to ensure that no default password can be usedwhich would thus endanger the security of the A850, it is
