CHAPTER 3Configuring the Gateway136nite reasons to determine other parameters (e.g., anotherradio frequency for the communication with your RTUs).• Modem-Type dependent settings - allow to determine ifnotifications or logging, respectively, should take place, todefine the interval for slots (the slot interval specifies howoften internal sensor values are stored) and to define pingintervals (a ping is an action which is intended to reveal thearrival time of a message from one computer to another).Device parameterFigure 141. Wireless Modem - Device parameter• Name - for giving each Wireless Modem an unique name;• Device - as a Wireless Modem can be connected to the serial“Radio Modem” connection or directly via USB connection aswell as indirectly via an USB hub, the correspondingconnection is to be selected here;Note: This is a feature reserved for new types of Wireless Modemswhich may become available in the future. The A440 can beconnected only via the A440 interface.Figure 142. Wireless Modem - Device parameter - Device
