CHAPTER 2System Setup86Note: In order to be granted the rights to use the configurationtools, you must have logged in as system administrator (user“root”) or as user administrator (user “admin”).Firmware toolsFirmware tools are provided for your support when performingfirmware upgrades which may become available in the future. Assoon as an upgrade of the firmware will be available, you will beable to download it from Adcon’s website, following the instruc-tions given there, or by receiving it from your Adcon distributor,respectively. After having the new firmware available on your localPC, you will have to transfer it to your A850.The following firmware tools are provided:• “List uploaded images in your browser”: view all uploadedfirmware images stored in the flash memory of your A850,Note: The purpose of this feature is to provide the possibility tocheck if all files required for a firmware upgrade have beenuploaded to the A850. This check should be made beforethe new firmware is started with “reboot”, after that, the listof uploaded images will be erased again.• “Upload an A850 firmware image stored as local file”: load anactual version of the firmware image in your A850,Note: Perform an upgrade only if you have problems with yourA850 or if an upgrade is recommended by Adcon, respec-tively.• “Reboot the Gateway”: after a firmware upgrade has beenprepared, you have to reboot your A850 anew in order toactivate the new firmware.• “Set Date and Time of the Gateway”: in any case, after afirmware upgrade, you have to enter date and time anew.Note: In order to be granted the rights to use the firmware tools,you must have logged in as system administrator (user“root”).
