CHAPTER 4Using the Gateway180Figure 189. Sensor type - Analog sensor settings - Cabling• Sensor supply time - the delay allowed for the sensors tosettle after power has been applied to them (the default valueis 2 seconds) so that the sampling of accurate measurementscan begin.Analog sensor sampling methodsFigure 190. Sensor type - Analog sensor sampling methodsDetermination of the sampling methods permitted for the sensortype and selection of the sampling method to be used.Allowed sampling methods - check all check boxes for samplingmethods that are allowed for this sensor type:• minimum - set sampling method to minimum, i.e. thespecified analog channel is instructed to store the lowestsampled value;• maximum - set sampling method to maximum, i.e. thespecified analog channel is instructed to store the highestsampled value;• sum - set sampling method to sum, i.e. the specified analogchannel is instructed to store the sum of all sampled values;• arithmetic average - set sampling method to arithmeticaverage, i.e. the specified analog channel is instructed tostore the arithmetic average of all sampled values;• circular average - set sampling method to circular average, i.e.the specified analog channel is instructed to store the circularaverage of all sampled values;
