Axis 27979R1 User Manual

Contents

Configuration Possibilities116 AXIS 5550 User’s ManualNetwork SpeedWith the Network Speed parameter you can manually specify the speed atwhich you will send and receive network packages. You can change theNetwork Speed setting to correspond to the type of network you are using(10 or 100 Mbit).To change the Network Speed in an Ethernet network, log in to the printserver’s internal Web pages and click Admin | General Settings =>Change.You have the options listed here:The default Network Speed value is AUTO_SENSE, which is the correctoption for the majority of users.If you choose a faulty Network Speed option for your network, you mayloose contact with the print server.To reset the Network Speed parameter to AUTO_SENSE, you will have toreboot the print server (disconnect and then re-connect the externalpower supply).NetWare Packet Signature LevelsNetWare Packet Signatures protect servers and clients using the NCP(NetWare Core Protocol) services and prevent packet forgery by requiringthe server and the client to sign each NCP packet.There are two levels of NCP Packet Signature: the Server Level and theAXIS Print Server Level (also know as the Workstation Level).Server Levels Server packet signature levels are assigned by a new SET parameter:SET NCP PACKET SIGNATURE OPTION = nNetwork Speed CommentAUTO_SENSE This is the default value where the print server detects which speed is op-timal for each network package you transfer.10_HALF__DX 10 Half Duplex10_FULL_DX 10 Full Duplex100_HALF_DX 100 Half Duplex100_FULL_DX 100 Full DuplexKey to Server Levels Explanation0 Server does not sign packets (regardless of the print serverlevel)1 (default) Server signs packets only if the print server requests it (printserver level is 2 or higher)2 Server signs packets if the print server is capable of signing(print server level is 1 or higher)3 Server signs packets and requires the print server to signpackets (or logging in will fail)