Adding Printers in Macintosh40 AXIS 5550 User’s ManualInstallation in Mac OS X using AppleTalkThis section describes setting up your print server for printing in the MacOS X.1. Start Print Center (from Go | Applications | Utilities => Print Center) orthe Printer Setup Utillity.2. Select Printers | Add Printer...3. From the Printer List dialog, select AppleTalk.4. You will also have access to an LPT port, which will appear as LPT1 in thelist. Example: AXIS100086_LPT1.5. Select the print server port you want to use.6. Select an appropriate printer driver for your printer from the Printer Modeldrop-down list. If the printer is not available in the list, select Generic.(Note: Generic is only used for postscript printers.)You can also browse for a printer driver on your computer or network byselecting Other... from the list.7. Click Add to complete the installation.Installation of LPR printing in MAC OS XIf you want to print using LPR, select:1. Printers | Add Printer...2. From the Printer List dialog, select LPR printers using IP.3. Enter the IP address or host name of the print server in the LPR printer’sAddress field. You must uncheck the Use Default Queue on Server checkbox and enter a Queue Name:Physical ports:Enter USB1 if you wish to use the USB port.Enter LPT1 for the AXIS 5550 if you wish to use the parallel port.Logical printer ports:AXIS 5550: pr1, pr3, pr5, pr7= LPT1. pr2, pr4, pr6, pr8=USB1Choose a printer driver from the Printer Model list and click Add to finish.
