Adding Printers in NetWare48AXIS 5550 User’s Manual9.You will find the print server in the next window with the printer attachedon the connected port. Depending on the transport protocol you used whenyou start the installation, the print server should appear as following:•TCP/IP Network protocol:IP Address and Port,e.g:192.168.70.243andLPT1Only the ports with a connected printer show up in this window. Ifthe printer is not in the displayed print list, clickManually specifythe print serverand do the following: Enter the print server’s IPaddress in theIP Addressfield and choose a port in thePrint ServerPortfield:e.g., 192.168.70.243 and LPT1The port numbers are USB1 or LPT1; “other/unknown” denotes theUSB1 port.IPX Network protocol:All the available ports will be presented, regardless if the printers areor not connected to those ports, e.g.AXIS5FF66A_P1corresponds to theLPT1port, andAXIS5FF66A_P2corresponds to theUSB1port.The IPX Addresses for the above printers will appear as::Ports availableUSB portParallel portAXIS 5550other/unknownparallel
