Adding Printers in NetWare60 AXIS 5550 User’s Manual3. Novell iPrint uses the NDPS infrastructure, so make sure that all the NDPSrequirements have been met:• Make sure that the BROKER.NLM is loaded. If it isn’t, type LOADBROKER in the server console prompt and select the name of theBroker.• Make sure that the NDPS Manager object is created in the NovellDirectory Services (NDS) tree. Refer to your Novell documentationfor creating this object.• Make sure that the NDPSM.NLM is loaded. If it isn’t, type LOADNDPSM in the server console prompt and select the appropriateNDPS Manager.4. Shutdown Tomcat and the NetWare Enterprise Web Server on the NetWarefile server by executing the following commands:Type "NSWEBDN" Type "TOMCAT33 -STOP" Type "NVXADMDN" 5. Map the next available drive (e.g. G:) to the root of volume SYS on yourNetWare server.From the temporary directory where axisIPP-snap-in.zip has beenunzipped, run the batch file AxisIPP.bat (default G:).If the drive G: is not available, you have to edit the batch file and changethe drive to next available one.Check that each line in the batch file is executed without failure.6. Restart Tomcat and the NetWare Enterprise Web Server on the file serverby executing the following commands:Type "TOMCAT33" Type "NVXADMUP" Type "NSWEB" 7. Access the iManager Web page on the NetWare server by opening thefollowing URL:https://:2200/eMFrame/iManager.htmlYou have to authenticate.8. Click on iPrint Management on the left pane and select Create Printer.9. On the right pane, verify that the newly installed AXIS IPP GatewayConfiguration is under the Gateway type drop-down menu.If not, it may be necessary to restart the NetWare server.Now you are ready to use the AXIS IPP Gateway Configuration for installingiPrint printers. You have to have Administrator rights to install the printersthrough iPrint.
