Management and ConfigurationAXIS 5550 User’s Manual 87Admin When in Admin mode, you have access to all the print server's parametersand you can change them to your liking. This mode is intended fornetwork administrators and can be password protected to preventunauthorized changing of the print server parameters.Note:Accessing the WebPagesFollow the steps below to access the internal Web pages of the AxisNetwork Print Server:1. Enter the print server’s IP address (or host name) in the Location/Addressfield of your Web browser. Press Enter2. The Printer Overview page will appear. Click Admin to access theAdministration Web pages.Note:3. If you have changed the User/Password combination, you will be promptedfor them. Click OK.To protect the Admin pages from unauthorized use, it is highly recommended that you changethe default password.This is done from the Admin | General Settings | General tab. Enter the password in the RootPassword field.• You can address the print server’s Web interface via https:// To do this you must enablethe SSL/TLS protocols in the Web interface: Admin | Network Settings | Detailed View| TCP/IP Network and set the HTTPS Enabled parameter to Yes (you must have a validcertificate loaded). If you do not have a valid certificate loaded, select Admin | SecuritySettings and click Create.
