IP Addressing128 AXIS 5550 User’s ManualSetting the IP Addressusing DHCPFollow the instructions below to download the IP address using DHCP:1. Edit or create a scope in the DHCP manager of the DHCP daemon. Theentries included in this scope should contain the following parameters:• range of IP addresses• subnet mask• default router IP address• WINS server IP address(es) or DDNS server IP address(es)• lease duration2. Activate the scope. The print server automatically downloads the DHCPparameters. If you are using WINS or DNS, you should include at least oneWINS or DNS server IP address in the DHCP scope. Immediately after the IPaddress has been received, the print server registers its host name and IPaddress on the WINS alternatively DNS server. Refer to “Registering andResolving Host Names” on page 127 for more information. The print servercan automatically download a customized config file from a TFTP server. Justadd the name of the config file and the TFTP server’s IP address to your DHCPscope. The config file is downloaded immediately after the print serverreceives its IP address.3. You have now successfully set the IP address of your print server.Note:You have to restart the print server to download the IP address.
