MAKING EMBROIDERY ADJUSTMENTS143Advanced Embroidery5For example: Press to select 25 mm (1 inch) and themachine will not trim a jump stitch of 25 mm or lessbefore moving to the next stitching.Adjusting the Embroidery Speeda Press . The settings screen appears.b Press . The embroidery settings screen appears.c Display [Max Embroidery Speed] in the embroiderysettings screen.d Use to change the maximum embroideryspeed.Changing the Thread Color DisplayYou can display the name of the thread colors orembroidery thread number.a Press . The settings screen appears.b Press . The embroidery settings screen appears.c Display [Thread Color] in the embroidery settingsscreen.d Use to display the name of the thread colorsor the embroidery thread number.e Use to select a thread brand.Aligning the Pattern and the NeedleExample: Aligning the lower left side of a pattern andthe needleNote• If design has many trims it is recommended toselect a higher jump stitch trim setting in order toreduce the amount of excess tails on backside offabric.• The higher number of the jump stitch lengthselected, the fewer number of times the machinewill trim. In this case, more jump stitches remain onthe surface of the fabric.Memo• SPM is the number of stitches embroidered in oneminute.• Decrease the embroidery speed whenembroidering on thin, thick, or heavy fabrics andwhen using a speciality thread like a metallicthread.• The setting specified before the main power is setto OFF remains selected the next time that themachine is turned ON.Memo• Colors on the screen may vary slightly from actualspool colors.• [Original], imported data remains the brand threadcreated with the software, is set as a default.