Bang & Olufsen BeoVision Avant-55 User Manual

Also see for BeoVision Avant-55: Quick guide User guide

Contents

Bang & Olufsen BeoVision Avant-55 User Manual Manual pdf 14 page image

ConnectionsConnection of productsThe connection panel on your television allows you to connect a variety of extraproducts, such as a Blu-ray player or a music system.Products you connect to these sockets can be registered in the Source list menu. Formore information, press the red button in the on-screen help and find 'Set upconnected products'.The illustration shows an example of connections to the PL1-4 sockets.Before you connect any products to your television, remember to disconnect thetelevision from the mains. Except when connecting a source to an HDMI IN or USBsocket.Depending on the type of product you connect to the television, different cables andmaybe also adaptors are needed. Cables and adaptors are available from your Bang &Olufsen retailer.LoudspeakersUse Bang & Olufsen BeoLab speakers. Cables are available from your Bang & Olufsenretailer.You can also connect up to eight speakers wirelessly. For more information, press thered button in the on-screen help and find 'Sound settings'.To obtain the best possible wireless connection, it is recommended to place all wirelessspeakers within a range of approximately 9 metres (29.5 ft) from the television.Do not place any obstacles in front of the television or wireless speakers as this mayinterfere with the wireless connection. The wireless speakers should be placed in oneroom and be visible from the television. See the guide for your speaker for informationabout whether or not your speaker can be connected wirelessly.Products with HDMI™ outputProducts with HDMI output such as a set-top box can be connected to any availableHDMI IN socket in the television. For more information on how to set up connectedproducts, press the red button in the on-screen help and find 'Set up connected products'.A configured source can be selected on the BeoRemote One or via TV in the Homemenu.Connected products can be operated with its own remote control or you may downloada Peripheral Unit Controller (PUC) table, if available, to use the Bang & Olufsen remotecontrol. For more information, press the red button in the on-screen help and find 'PUCtables'.Connection panelsProducts you connect permanently to the connection panel can be registered inthe Source list menu by pressing  for each source. For more information, press thered button in the on-screen help and find 'Set up a source'.We recommend that you connect the television to the Internet to use Smart TVfunctions, receive software updates and to download Peripheral Unit Controller (PUC)tables. PUC tables enable you to operate connected non-Bang & Olufsen products withyour Bang & Olufsen remote control.Connect the mains socket () on the connection panel of your television to the wall14