Picture correctionsYou can make brightness and contrast corrections as well as shift and zoom the picturehorizontally and vertically on the TV screen to avoid any unwanted areas being visible onthe screen. The options available depends on the source selected.Auto selectionIf available for the connected source, select if the source should be selectedautomatically as soon as the television detects a signal, provided the television is on atthe time.Audio levelSet the audio level of the connected source. This also enables you to align the audio levelof the different products connected to the television.BlankingIf available for the connected source, select for how long the TV screen should display ablank screen before it displays the signal of the connected product. If, for example, aconnected set-top box requires some time to start up, you can set the 'blanking' time toensure that the picture is ready before it is displayed on the television.BeoRemote listsSelect if a source should be present in the list of video sources in your remote controldisplay when you press TV, in the list of music sources when you press MUSIC, in bothlists or in none of them.Note that if you select None, the selected source will not be visible in the TV and Musiclists on your remote control.Reset all settings for a sourceIf you have connected and configured a source to a specific socket on the television andthen disconnect the source permanently, you must reset the source settings. Highlightthe source in the Source list menu, press and select Reset to default. When you selectYes, the source is no longer configured to this socket. Next time you connect a source tothe socket, you are asked to configure the source.Under Service you can remove unused PUC tables. For more information, press the redbutton in the on-screen help and find 'Service and software update'.22