Bang & Olufsen BeoVision Avant-55 User Manual

Also see for BeoVision Avant-55: Quick guide User guide

Contents

Bang & Olufsen BeoVision Avant-55 User Manual Manual pdf 21 page image

Speaker groupSelect the speaker group to be used with this source.For more information about setting up speaker groups, press the red button in the on-screen help and find 'Sound settings'.Picture offSelect whether the picture on the TV screen should switch off when you select an audiosource. Options are Timeout for the picture to switch off when a source has not beenoperated for a while, Never for the picture to remain on and Always for the picture to beswitched off as soon as you select the source.When the picture is switched off, you can still hear the sound of the source. If you haveselected Timeout and the picture has faded out, you can activate the picture again if youpress INFO or the centre button.Picture modeSelect a picture mode to be used for the selected source.General: Continuously and automatically adjusts the picture to the signal and theviewing conditions.Movie: Continuously and automatically adjusts the picture to the signal and theviewing conditions. The colour temperature is set to 6500 K.Game: Adjusts the picture to use the screen as a monitor for a connected gameconsole or PC. It minimises the video delay and add signal processing for optimalpicture.Monitor: Adjusts the picture to use the screen as a monitor for PC application. Itminimises the video delay and neutralises all signal processing for unalteredpicture. The colour temperature is set to 6500 K.Picture formatSet up a picture format to be used each time you activate the source.Auto: Reduces black bars at the top and bottom. The picture is scaled withoutchanging the picture geometry. However, if a 4:3 source signals a wrong aspectratio, the picture will be stretched horizontally.Auto wide: Reduces black bars at the top and bottom. Furthermore, the pictureis scaled and stretched horizontally to reduce black bars on the left and rightand to fill out as much of the screen as possible.Note, that you can select additional picture formats in the Options menu found in LIST onyour remote control.If Auto or Auto wide do not give a satisfactory result due to incorrect format informationfrom the source, you can select additional picture formats in the Options menu found inLIST on your remote control. Select one of the formats Fixed A – Fixed D until you obtainthe optimum picture format. When you have selected Fixed C or Fixed D, you canuse  and  to move the picture up and down.21