Bang & Olufsen BeoVision Avant-55 User Manual

Also see for BeoVision Avant-55: Quick guide User guide

Contents

Bang & Olufsen BeoVision Avant-55 User Manual Manual pdf 26 page image

Tilt the television mounted on a table stand...1. Press LIST, then  or  to bring up STAND in the BeoRemote One displayand press the centre button.2. Press  or  to tilt the television.To use the motorised floor stand or wall bracket function, you have to calibrate the floorstand or wall bracket first. For more, press the red button in the on-screen help and find'Stand settings'.Daily use of sound modes and speaker groupsYou can extend your television into a surround sound system by adding BeoLabloudspeakers and subwoofers.When you switch on a source, the television automatically selects the appropriatesound mode for the source you are using. However, you can select another soundmode at any time.Also, when you switch on the television, the TV speaker group is selectedautomatically. However, you can always select another group of activated speakers ifyou want to listen to music without having to sit in front of the television, for example,when you sit at the dining table or in an armchair.You can adjust the settings of the sound modes and set up speaker groups. For moreinformation about sound modes and speaker groups, press the red button in the on-screen help and find 'Sound modes' and 'Create a speaker group'.Select a sound modeYou can select the sound mode that suits the source you are using.1. Press LIST, then  or  to bring up SOUND in the BeoRemote One displayand press the centre button.2. Press  or  to highlight the sound mode you want and press the centrebutton.3. Press  or  to step between modes.4. Press  to remove SOUND from the display.When you configure a source, you can set a sound mode to be selected automaticallyeach time you switch on the source. For information about preset selection, press the redbutton in the on-screen help and find 'Create a speaker group'.Select a speaker groupSelect the speaker group that suits your listening position.1. Press LIST, then  or  to bring up SPEAKER in the BeoRemote One displayand press the centre button.2. Press  or  to highlight the speaker group you want and press the centrebutton. The selected speakers cut in automatically.3. Press  or  to step between groups.4. Press  to remove SPEAKER from the display.When you configure a source, you can set a speaker group to be selected automaticallyeach time you switch on the source. For information about preset selection, press the redbutton in the on-screen help and find 'Create a speaker group'.26