Bang & Olufsen BeoVision Avant-55 User Manual

Also see for BeoVision Avant-55: Quick guide User guide

Contents

Bang & Olufsen BeoVision Avant-55 User Manual Manual pdf 46 page image

Bass and trebleIn the Bass and treble menu, decrease or increase the bass level and the treble level.Activate loudnessThe human ear is less sensitive to low frequencies when they are played at low volumelevels. In other words, when you lower the volume, the less bass you can hear. TheLoudness function counteracts this effect. As you reduce the volume, the bass and treblelevels are automatically increased to compensate for your reduced perception in theouter frequency bands. Loudness can be switched on or off for each sound mode.Sound informationLook up information on the current sound system in the Sound info menu.Eco modeMake power saving settings for sound in the Eco mode menu. If you enable eco mode,the speakers that do not receive a signal when the television is on automatically switchoff. Wireless speakers are not switched off when they do not receive signals from thetelevision.Speaker connectionsWired speakersWhen setting up wired speakers, you must select which speakers you have connected toeach Power Link (PL) socket in the Speaker connections menu.**If all Power Link sockets with connected speakers are not shown in the Speakerconnections menu, you can press the green button to show all Power Link sockets.Important! If you select Line as speaker type in the Speaker connections list, the volumewill be very loud and you cannot adjust volume with your BeoRemote One. You must usethe product’s own remote control. Line is used for, for example, non-Bang & Olufsenamplifiers.Wireless speakersIf you have wireless speakers in your setup, the television automatically scans for wirelessspeakers and associate the detected speakers with wireless Power Link channels duringfirst-time setup. However, you can also scan for wireless speakers and associate thedetected speakers with the television’s wireless Power Link channels manually if youpress , select Scan for wireless speakers and follow on-screen instructions.You can also access a more advanced scanning function described in this chapter if youpress , select Settings, then Sound and Speaker connections.Scan for and associate wireless speakers …1. In the Speaker connections menu, press the red button to rescan.2. When the scanning is completed, press the centre button to associate thedetected speakers with the television.46