Bang & Olufsen BeoVision Avant-55 User Manual

Also see for BeoVision Avant-55: Quick guide User guide

Contents

Bang & Olufsen BeoVision Avant-55 User Manual Manual pdf 64 page image

Auto system updates – introductionIf you have a system setup with several Bang & Olufsen products, the entire system isupdated when you check for updates. You should enable automatic software update ofthe system in the TV menu. You can set the time of day you want automatic softwareupdates to take place to ensure that they do not interfere with the use of your television(may not be available in the current software version), and select whether or not youwant to be notified about updates. Available software updates for all the Bang & Olufsenproducts in your setup will then be downloaded automatically on a regular basis.* Ifsystem setup is not available in the current software version, you can still performautomatic software update of the television.*You can only enable or disable automatic software updates on the entire system andnot on a single product.ActivationSet up your entire system to be updated automatically when new software is available. Itis strongly recommended to enable automatic software updates to ensure an optimumperformance of the products in your setup. Follow on-screen instructions.If system setup is not available in the current software version, you can still performautomatic software update of the television.Time of the dayThis function may not be available in the current software version.Set a time of the day the television should check for available software updates.NotificationsSelect if you want to receive notifications when software updates are available. TheNotifications menu is only available if Activation in the Auto system update menu isdisabled. However, it is recommended to enable the Activation menu.PUC tablesPUC tables – introductionIn the PUC management menu, download or delete peripheral unit controller (PUC)tables or check for updates for tables already downloaded to the television. Theperipheral unit controller enables you to operate a connected non-Bang & Olufsenproduct with the Bang & Olufsen remote control. The peripheral unit controller built intoyour television "translates" signals from the remote control into signals understood bythe connected product. For the "translation" to take place correctly, the appropriate PUCtable must be downloaded into the television.The number of supported products is updated on a regular basis. However, we cannotguarantee that you can find your product in the list.Download PUC tables64