Bang & Olufsen BeoVision Avant-55 User Manual

Also see for BeoVision Avant-55: Quick guide User guide

Contents

Bang & Olufsen BeoVision Avant-55 User Manual Manual pdf 62 page image

Distribute sound from video sourcesDistribution of sound from video sources may not be available in the current softwareversion.In the Sound from video sources menu, you set up whether or not your build-in orconnected video sources should be able to distribute sound to other sources connectedto your home network.If your setup includes a wireless connection to the home network and your television anda link product with speakers are placed close to each other so that you can hear thesound from both products, you will experience echo problems, because the sound isdelayed a little on the way to the speakers of the link product. To avoid this, werecommend that you set Sound from video sources to off. Alternatively, you can connectboth the television and all link products to the home network by means of an Ethernetcable instead of having a wireless connection.HDMI MatrixThe HDMI Matrix function may not be available in the current software version.The HDMI Matrix itself is a physical product that can be connected allowing you toconnect up to 32 external sources to up to 32 televisions in different rooms and accessthe sources either individually from each television or simultaneously from several roomsvia BeoRemote One.The HDMI Matrix must be connected and set up by your Bang & Olufsen retailer.You cannot connect more than one HDMI Matrix in a setup.Settings in the HDMI MATRIX menuIn the HDMI Matrix menu, you can select settings for your HDMI Matrix.Connect an HDMI Matrix …1. In the Product Integration menu, highlight HDMI Matrix and press .2. Select an HDMI IN socket and press the centre button.3. Follow on-screen instructions.After selecting Finish, the HDMI Matrix is configured and the Source list is shown for youto configure the sources connected to the HDMI Matrix. This is done the same way asother connected products. For information about setting up connected products, pressthe red button in the on-screen help and find 'Set up connected products'.If you at a later time disable a saved HDMI Matrix configuration by setting the HDMIMatrix field to No, your settings for inputs are still saved. This means that if you enablethe HDMI Matrix again, the settings are remembered.To unconfigure a source, press the red button in the on-screen help and find 'Reset allsettings for a source'.62