22 226 Adjustments6.4 Adjusting the PadFor the perfect application of labels it is necessary that the pad is placed precisely above the dispensed label.Aligning the pad parallel to the dispensing plateThe edge of the pad should be positioned parallel to the dispensing plate of the printer in order to position the labelexactly on the pad.431 25 6Fig. 17 Aligning the pad to the dispensing plate1. Loosen the knurled screw (3) and the set screw (4).2. Screw in the knurled screw (3) until the pad edges (5) are aligned parallelto the dispensing edge (6) of the printer.3. Tighten the set screw (4) until it touches the printer.Aligning the pad at an angle to the dispensing plate0°4. If the angle between the pad surface and the dispensing edge - support surface is not 0 ° loosen screw (2).5. Correct the angle of attack by turning the eccentric (1).6. Tighten screw (2).
