CAB 4712 Service Manual
Also see for 4712: Assembly instructionsOperator's manualService manual
                                                     | |
Contents
| 
36 366.14.4 Dismounting the pliers assemblyIf it is necessary to change the lifting cylinder flag (2) or the connecting rod (14), the following assemblies must beremoved from the dismounted assembly 'pliers'.Fig. 39 Disassemble the pliers assembly Disassemble the pads (1). Loosen and pull out the sensor (8). Loosen the screws (7) and remove the compact cylinder (6) from the holder ofthe base plate (1). Loosen screws (10) and (11) and remove the cover (9) with connections. Loosen the screws (18) and remove the covers (17) from the pliers jaws (15).. Pull out the pliers jaws (15) and axles (16) . Loosen the nut (13) on the connecting rod linkage (14) and screwthe cylinder piston (2.1) from the cylinder (2) out of the connectingrod linkage (4). Remove the connecting rod linkage (14) from the base body (1). Ifonly the connecting rod linkage (14) is changed, the cylinder (2) isnot dismantled and the next two points are omitted.2.11314 Only for changing the lifting cylinder (2), the sensor brackets (4) and the throttle valves (3) Remove from the lifting cylinder (2). Loosen nut (12) and remove lifting cylinder (2).6 Adjustments |
Related manuals for CAB 4712
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine