396.15 Set Cylinder Pliers / Actor 3.16.15.1 Set throttle valves on cylinder 'pliers'3.06ZX YThrottle valve (3.06) movement outsideMarker on the tube with the number 6Close throttle valve (3.06) completely.Turn the set screw clockwise until it stops.If no different value is noted in the test report, open the throttlevalve (3.06) by turning it 8.5 turns counterclockwise.Fig. 44 Throttle valves on cylinder 'pliers'6.15.2 Set sensor on cylinder 'pliers'17 mm3.12Sensor (3.12) pliers openMarker on the sensor with the number 6If no different value is noted in the test report, set the distancebetween the edge of the sensor (3.12) and the edge of the compactcylinder to 17 mm.As a check, switch on the printer and switch on compressed air.In the start position of the applicator, the LED on the sensor mustlight up. The pliers are open in this position.When the pliers are closed, the LED goes out.Fig. 45 Sensor on cylinder 'pliers'6 Adjustments
