Chapter 5: Local Management5-1006H123-50 and 6H133-37 User’s Guide5.29 PORT LEVEL SECURITY CONFIGURATIONSCREENThe Port Level Security Configuration screen, Figure 5-35, functionssimilarly to the Module Level Security Configuration screen, except thatit is used to set the security of each port of a selected connector.To access the Port Level Security Configuration screen, use the arrowkeys to highlight the PORT LEVEL SECURITY CONFIGURATIONmenu item on the Repeater Configuration Menu screen and press ENTER.The Port Level Security Configuration screen displays.Figure 5-35 Port Level Security Configuration Screen6H123-50 LOCAL MANAGEMENTPort Level Security ConfigurationModule Type: 6H123-50 Firmware Revision: XX.XX.XXSlot Number: X BOOTPROM Revision: XX.XX.XXPo rt Network Security State Action On Intruder Address1 1 [LockOnNext] [DisablePort] [SendTrap]2 2 [NonSecure] [00-00-00-00-00-00]3 1 [LockedOnAddr] [DisablePort] [SendTrap] [xx.xx.xx.xx.xx.xx]4 2 [NonSecure] [00-00-00-00-00-00]5 2 [NonSecure] [00-00-00-00-00-00]6 2 [NonSecure] [00-00-00-00-00-00]7 2 [NonSecure] [00-00-00-00-00-00]8 2 [NonSecure] [00-00-00-00-00-00]9 2 [NonSecure] [00-00-00-00-00-00]10 2 [NonSecure] [00-00-00-00-00-00]11 2 [NonSecure] [00-00-00-00-00-00]12 2 [NonSecure] [00-00-00-00-00-00]SAVE CONNECTOR #: [1] EXIT RETURNEvent Message Line2276_113
