Chassis Configuration Screen6H123-50 and 6H133-37 User’s Guide5-25If the time entered is within the 3 to 99 seconds range, the Event MessageLine at the top of the screen displays “SAVED OK”. If the entry is notvalid, Local Management does not alter the current setting, but it doesrefresh the Screen Refresh Time field with the previous value.5.7.6 Setting the Screen Lockout TimeThe screen lockout time can be set from 1 to 30 minutes with a default of15 minutes. To set a new lockout time, perform the following steps:1. Use the arrow keys to highlight the Screen Lockout Time field.2. Enter a number from 1 to 30.3. Press ENTER to set the lockout time in the input field.4. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen and press ENTER.If the time entered is within the 1 to 30 minutes range, the Event MessageLine at the top of the screen displays “SAVED OK”. If the entry is notvalid, Local Management does not alter the current setting, but it doesrefresh the Screen Lockout Time field with the previous value.
