6H123-50 and 6H133-37 User’s Guide5-1CHAPTER 5LOCAL MANAGEMENTThis chapter explains setting up a management terminal to access6H123-50 and 6H133-37 Local Management. It also explains using theLocal Management screens and commands.5.1 OVERVIEWLocal Management for the 6H123-50 and 6H133-37 consists of a seriesof management screens that enable the management of the module, theattached segments and the 6C105 chassis. The management screensenable the user to do the following tasks:• Manage any interface module in the chassis via a connection to asingle interface module.• Assign IP addresses and subnet masks to the 6H123-50, 6H133-37 andthe 6C105 chassis.• Control access to the 6H123-50, 6H133-37 and the 6C105 chassis byestablishing community names.• Download a new image of operating software.• Designate which Network Management Workstations receive SNMPtraps from the 6H123-50, 6H133-37 and the 6C105 chassis.• Monitor the environmental status of the 6C105 chassis.• View bridge and port statistics.• Enable port Trunking to perform load sharing.• Configure the Fast Ethernet Interface Modules for the 6H123-50 andthe HSIM for the 6H133-37.NOTEThe Local Management screens shown in this chapter are forthe 6H123-50. The 6H133-37 shares most of the followingLocal Management screens. All Local Management functionsspecific to any one interface module are preceded by a Note toalert the reader.
