Using CyberMONITORCyberMONITOR User’s Guide3-13Ethernet Statistical DataThe following is a row-by-row breakdown of the Ethernet network interface statistics:Protocol - Protocol of the interface being monitored.Admin Status - Up, Down, or Testing - the “desired” state of the interface.Operational Status - The “actual” state of the interface (Up, Down, or Testing).Kilobits In - the total kilobits input to the interface since the device started.Kilobits Out - the total kilobits output by the interface since the device started.Utilization since last poll - bandwidth utilization stated as a percentage of the maximumutilization - i.e., 10% of 10000 Kilobits.Average Kbps - The number of kilobits per second (averaged over the polling interval), sincethe device started.Average Kbps - The number of kilobits per second, averaged over the polling interval, sincethe monitor session started.Peak Kilobits - absolute max rate during the monitoring session, stated as [peak Rate] @ [time]and [date].Primary IP Address - the primary IP Address for the interface being monitored.Secondary IP Address - the Secondary IP Address for the interface being monitored. Clickingthe button at the end of this row will display a list of Secondary IP Addresses if there is morethan one Secondary IP Address.Proxy ARP - When Proxy ARP is enabled, and an ARP request is received, for an IP Hostwhose network address is listed in the IP Route Table, the IP Routing Services sends a ProxyARP response, with the physical address of the receiving router port in place of the requestedhost's physical address.Horizontal Scroll Bar - The horizontal scroll bar in the center of the table is used to scroll thedata table horizontally, to view data for other Interface Numbers. The Interface Numberappears in the Title panels (i.e., Ethernet1-1, indicates Ethernet network interface port 1,logicalInterface Number 1).