Cabletron Systems FN10 Reference Manual

Also see for Fast Network 10: User guide Quick setup guide

Contents

Es-1xe GroupFast Network 10 MIB Reference GuidePage 6-37sxfilterTable {sxfilter 7}Not AccessibleA list of combination filters; one per defined filter. If fewer thansxfilterMaxCount filters have been defined, then an additional sxfilterEntryexists, which is used as part of the sequence for defining a new filter.sxfilterEntry {sxfilterTable 1}Not AccessibleA set of objects for a combination filter. The individual components are describedbelow.sxfilterIndex {sxfilterEntry 1}Integer Read-OnlyThis number always matches the instance of the sxfilterEntry. For example,{sxfilterIndex 3} contains the value “3”.sxfilterID {sxfilterEntry 2}Integer Read-OnlyIdentifier assigned to the filter, used for obtaining the value for sxfilterDeleteIDso that the filter can be deleted.sxfilterPortNo {sxfilterEntry 3}Integer Read-WriteThe port number related to this filter.sxfilterComboType {sxfilterEntry 4}Integer Read-WriteWhether this is an entry filter (0) or an exit filter (1) type.sxfilterFlags {sxfilterEntry 5}Integer Read-WriteA set of flag bits which control the operation of the filter. Filters will not preventpackets from being accepted by the FN10 as a final destination (e.g., for NMSpackets being used to control the FN10). The following bits are used:• bit 14 used for sxfilterOffsetif set, the sxfilterOffset field applies to the data beginning from past theFrame Type information, rather than from the start of the packet