Cabletron Systems FN10 Reference Manual

Also see for Fast Network 10: User guide Quick setup guide

Contents

Chapter 6: Cabletron MIBPage 6-10Fast Network 10 MIB Reference GuidesxswBases {sxswFileset 7}Octet String Read-OnlyAn array (4 octets per file), containing the software’s base loading address ofeach of the files. Each address is encoded as a series of 4 bytes, which should beconverted into a 32 bit integer.sxswFlashBank {sxswFileset 8}Integer Read-OnlyThe bank number where the software file set resides. The possible values are:• first-bank (1)• second-bank (2)6.2.3 Administration Groupsxadmin {es-1xe 3}This group contains the attributes for configuring the system level control of theentire FN10 and the overall FN10 status.sxadminFatalErr {sxadmin 1}Octet String Read-OnlyThis is a 32 byte array which contains information about the cause of theprevious system reset. This will describe the circumstances which forced thesystem software to perform a reboot. The values in the first byte have thefollowing meanings:• (0) - Power failure• (1) - Watchdog Timeout• (2) - NMS Requested Shutdown; next three bytes are not applicable; next fourbytes contain the NMS’s IP address; remaining 24 bytes are not applicable)• (3-255) - Fatal ErrorsxadminAnyPass {sxadmin 2}Octet String Read-WriteThe authentication password (0-24 bytes) which must match the communityname in an SNMP Get, Getnext, or Set PDU, in order for the operation to beperformed. A zero length password indicates that any community name isacceptable.