Cabletron Systems FN10 Reference Manual

Also see for Fast Network 10: User guide Quick setup guide

Contents

PPP Link Control TableFast Network 10 MIB Reference GuidePage 5-3pppLinkStatusRemoteMRU {pppLinkStatusEntry 7}Integer Read-onlyThe current value of the MRU for the remote PPP Entity. This value is the MRUthat the local entity is using when sending packets to the remote PPP entity. Thevalue of this object is meaningful only when the link has reached the open state(ifOperStatus is up).pppLinkStatusLocalToPeerACCMap {pppLinkStatusEntry 8}Octet String Read-onlyThe current value of the ACC Map used for sending packets from the local PPPentity to the remote PPP entity. The value of this object is meaningful only whenthe link has reached the open state (ifOperStatus is up).Value of 0 indicates that ACC Map is not supported.pppLinkStatusPeerToLocalACCMap {pppLinkStatusEntry 9}Octet String Read-onlyThe ACC Map used by the remote PPP entity when transmitting packets to thelocal PPP entity. The value of this object is meaningful only when the link hasreached the open state (ifOperStatus is up).pppLinkStatusLocalToRemoteProtocolCompression {pppLinkStatusEntry 10}Integer Read-onlyIndicates whether the local PPP entity will use protocol compression whentransmitting packets to the remote PPP entity. The value of this object ismeaningful only when the link has reached the open state (ifOperStatus is up).• enabled (1) - supports protocol compression• disabled (2) - no support for protocol compressionpppLinkStatusRemoteToLocalProtocolCompression {pppLinkStatusEntry 11}Integer Read-onlyIndicates whether the remote PPP entity will use Protocol Compression whentransmitting packets to the local PPP entity. The value of this object ismeaningful only when the link has reached the open state (ifOperStatus is up).• enabled (1) - supports protocol compression.• disabled (2) - no support for protocol compression.