Cabletron Systems FN10 Reference Manual

Also see for Fast Network 10: User guide Quick setup guide

Contents

Es-1xe GroupFast Network 10 MIB Reference GuidePage 6-17ssxwdisConfigTotalTimeout {sxswdis 6}Integer Read-WriteThe number of seconds that the FN10 will wait for an acknowledgment to a datablock before it cancels a TFTP session. The factory specified default is 25seconds.6.2.5 Addresses Configuration Groupsxaddr {es-1xe 5}This attribute group allows the NMS to examine the current address table entries,as well as to remove both static and learned entry information, or to add andmodify pre-defined entry information (modifying certain entry information maycause the entire entry to be deleted), or to zero an entry’s statistics.The Addresses Configuration Group contains a few statistics about the entireFiltering Database, and information about the entry last examined or modified bythe NMS. Therefore, the SNMP GetNextRequest PDU is not appropriate to readthe entire Filtering Database. Instead, the NMS must either use the dot1d MIB orperform the following steps:Step 1. Set sxaddrIndex with the desired starting point (-1 will cause thedatabase to be read from the beginning).Step 2. Set sxaddrOperation with the “read-next” operation code. This willcause the FN10 to update the Addresses Configuration Group fieldsabout the entry, which includes updating sxaddrNext to contain thevalue for sxaddrIndex if one desires to obtain the next entry (sxaddrNextwill be set to -1 if there is no next entry).Step 3. Set the desired fields to NULL within the SetRequest PDU, or, issue aGetRequest(s) for the desired fields.If the sxaddrFlags field is returned with a value of zero, then no entry has beenreturned, and the NMS should continue trying to read-next, until sxaddrNext isreturned with a value of -1.