Cabletron Systems FN10 Reference Manual

Also see for Fast Network 10: User guide Quick setup guide

Contents

Chapter 4: Bridge MIBPage 4-6Fast Network 10 MIB Reference Guidedot1dStpBridgeForwardDelay {dot1dStp 14}Time Ticks Read-WriteThe value that all bridges use for ForwardDelay when this bridge is acting as theroot. Note that 802.1d/D9 specifies that the range for this parameter is related tothe value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by802.1d/D9 to be 1 second. An agent may return a badValue error if a set isattempted to a value which is not a whole number of seconds.The Forward Delay Time must be at least 4 seconds, and must adhere to theaforementioned equation involving Max Age Time and Forward Delay Time.dot1dStpPortTable {dot1dStp 15}Not AccessibleA table that contains port-specific information for the Spanning Tree Protocol.All FN10 ports, except for the last port (port 25), are included in this table,regardless of whether the Spanning Tree Protocol is currently enabled for theports.dot1dStpPortEntry {dot1dStpTable 1}Not AccessibleA list of information maintained by every port about the Spanning Tree Protocolstate for that port.dot1dStpPort {dot1dStpPortEntry 1}Integer Read-OnlyThe port number of the port for which this entry contains Spanning Tree Protocolmanagement information.dot1dStpPortPriority {dot1dStpPortEntry 2}Integer Read-WriteThe value of the priority field which is contained in the first (in network byteorder) octet of the (2 octet long) Port ID. The other octet of the Port ID is givenby the value of dot1dStpPort.Any value from 0 to 255 may be specified.