xiiiPREFACEThis manual provides the technical information needed to configure the ATMSwitches, the LAN and WAN network modules, and the accompanyingsoftware. This document also provides general ATM information and generalproduct information. This document was created for users with various levelsof experience. If you have any questions or problems, please contactCabletron Systems’ Technical Support.Chapter SummariesChapter 1 - Configuring PVCs - Describes how to create PVCs on a switchthrough the ATM Management Interface (AMI).Chapter 2 - Configuring a Classical IP ATM Network - Describes how todesign, configure, and maintain a Classical IP ATM network.Chapter 3 - Configuring an Emulated LAN - Provides an overview of LANEmulation and gives an example of how to configure an Emulated LAN.Chapter 4 - SONET Configuration - Contains configuration information forsupporting SONET network modules.Chapter 5 - DS-3 and DS-1 Configuration - Contains configuration informa-tion for supporting DS-3 and DS-1 network modules.Chapter 6 - E-3 and E-1 Configuration - Contains configuration informationfor supporting E-3 and E-1 network modules.Chapter 7 - J-2 Configuration - Contains configuration information for sup-porting J-2 network modules.Chapter 8 - TP25 Configuration - Contains configuration information for sup-porting TP25 network modules.Chapter 9 - TAXI Configuration - Contains configuration information forsupporting TAXI network modules.Appendix A - AMI Overview - Provides an overview of AMI and contains atext and graphical description of the root level AMI commands.
