B-19AMI Configuration CommandsB.4.7 Displaying the IP Interface ConfigurationThis command allows the user to display information about the configurationof the IP interfaces. Enter the following parameters:localhost::configuration ip> showinterface state address netmask broadcastie0 up 169.144.48.21 255.255.255.0 169.144.48.0asx0 up 169.144.60.21 255.255.255.0 169.144.60.0qaa0 up 169.144.64.21 255.255.255.0 169.144.64.0qaa1 downqaa2 downqaa3 downlo0 up 127.0.0.1 255.0.0.0 127.0.0.0el0 up 169.144.200.21 255.255.255.0 169.144.200.0el1 up 169.144.204.21 255.255.255.0 169.144.204.0el2 up 169.144.205.21 255.255.255.0 169.144.205.0el3 up 169.144.206.21 255.255.255.0 169.144.206.0IP Forwarding State: forwardingThe fields in this display are defined as follows:interface Indicates the name of the IP interface.state Lists the administrative state of the IP interface.address Displays the IP address of the IP interface.netmask Shows the netmask address of the IP interface.broadcast Indicates the broadcast address of the IP interface.The user may also designate a single interface to be displayed by enteringshow and the specific interface name at the prompt as follows:localhost::configuration ip> show ie0interface state address netmask broadcastie0 up 169.144.48.21 255.255.255.0 169.144.48.0IP Forwarding State: forwardingThe fields in this display are defined in the same manner as those listed abovein the example for showing the configuration of all of the IP interfaces.
