1-19Configuring PVCs1.5.1.2 Creating ATM ARP EntriesTo create a FORE IP PVC ARP entry, log in to AMI (see Appendix A of thismanual for information about logging into AMI). Data on this PVC is encap-sulated using null encapsulation (also known as VC-based multiplexing) asspecified in RFC-1483. Enter the following parameters:configuration atmarp newforeip (4|5) []host Indicates the IP address of the remote host.vpi Indicates the virtual path number. This must be 0.vci Indicates the virtual channel number.4|5 Designates the connection’s ATM AdaptationLayer (AAL) type.interface Indicates the FORE IP interface to be used. Thedefault is asx0.Once the parameters are entered, the FORE IP PVC ARP entry is createdinstantly by the SCP. At the same time, a command is entered automaticallyinto the current configuration database which creates this ATM ARP entryevery time the SCP is restarted.To create a new Classical IP PVC ARP entry, log in to AMI. All data is sentLLC/SNAP encapsulated. Enter the following parameters:configuration atmarp newclassicalip []host Indicates the host IP address of the remote IPendstation.vpi Indicates the virtual path number of the ClassicalIP PVC.vci Indicates the virtual channel number of the Clas-sical IP PVC.interface Indicates the name of the Classical IP interface tobe used for this connection. The default is qaa0.Once the parameters are entered, the Classical IP PVC ARP entry is createdinstantly by the SCP. At the same time, a command is entered automaticallyinto the current configuration database which creates this ATM ARP entryevery time that the SCP is restarted.
