B-10AMI Configuration CommandsB.2.8 Displaying the ATM ARP EntriesThis command displays the current ATM ARP cache. Enter the followingparameters:localhost::configuration atmarp> showlocalhost::configuration atmarp>When the prompt is returned with no information displayed, as shownabove, then the ATM ARP cache is empty.The following is an example of an ATM ARP cache.localhost::configuration atmarp> showIPaddress If VPI VCI AAL Type Direction198.29.22.9 asx0 0 63 aal5 foreIpSVC pending198.29.22.15 asx0 0 231 aal5 foreIpSVC pending198.29.22.37 asx0 0 65 aal34 foreIpSVC pendingIPaddress If NSAP Address198.29.17.3 qaa0 0x47.0005.80.ffe100.0000.f21b.0138.002048102754.00198.29.17.10 qaa0 0x47.0005.80.ffe100.0000.f21b.0137.002048100be6.00198.29.17.15 qaa0 0x47.0005.80.ffe100.0000.f21b.0137.00204810048d.00198.29.17.52 qaa0 0x47.0005.80.ffe100.0000.f21b.0138.0020481b0138.00The fields in this display have the following meanings:IPaddress Indicates the IP address for this connection.If Shows the name of the IP interface for this connec-tion.VPI Displays the virtual path number.VCI Displays the virtual channel number.AAL Displays the AAL type of the given connection.Type Lists the kind of connection. Can be foreIpPVC,foreIpSVC, classicalIpPVC, or classicalIpSVC.Direction Pending means that a connection has not (yet) beenestablished. Incomplete means that the IP-to-ATMaddress mapping is not yet known for the given IPaddress.NSAP Address Lists the NSAP address for this connection.
