Universal Home Remote SystemOperation (With Three Round LED)Your vehicle may have the Universal Home RemoteSystem. If there are three round Light Emitting Diode(LED) indicator lights above the Universal Home Remotebuttons, follow the instructions below.This system provides a way to replace up to threeremote control transmitters used to activate devicessuch as garage door openers, security systems,and home automation devices.Do not use this system with any garage door openerthat does not have the stop and reverse feature.This includes any garage door opener modelmanufactured before April 1, 1982.Read the instructions completely before attempting toprogram the transmitter. Because of the steps involved,it may be helpful to have another person available toassist you in programming the transmitter.Be sure to keep the original remote control transmitterfor use in other vehicles, as well as, for futureprogramming. You only need the original remote controltransmitter for Fixed Code programming. It is alsorecommended that upon the sale or lease terminationof the vehicle, the programmed buttons should beerased for security purposes. See “Erasing UniversalHome Remote Buttons” later in this section.When programming a garage door, it is advised to parkoutside of the garage. Be sure that people andobjects are clear of the garage door or security deviceyou are programming.2-52
