Driver Exit Settings Submenu ItemsRECALL EXIT SETTINGSTo recall exit settings:1. Enter the memory programming mode for yourexit settings by following the instructions listedpreviously under “Entering the Driver Exit SettingsSubmenu.”2. From the DRIVER EXIT SETTINGS submenu, turnthe tune/select knob to scroll to RECALL EXITSETTINGS and press in the knob.If the vehicle is in PARK (P), one beep will soundand your previously saved exit position will then berecalled.If the vehicle is not in PARK (P), three beeps willsound and your previously saved exit positionwill not be recalled.A memory recall can be stopped by pressing anymemory seat or mirror position button.If you would like the stored exit positions to be recalledwhen your vehicle is in PARK (P), the vehicle is off, andthe driver’s door is opened, see “AUTO EXIT SEAT” and“AUTO EXIT COLUMN” under Vehicle Personalization onpage 2-60.STORE EXIT SETTINGSTo store exit settings:1. Adjust your settings for the driver’s seat, the outsiderearview mirrors, and the steering column to acomfortable exit position.2. Enter the memory programming mode for yourexit settings by following the instructions listedpreviously under “Entering the Driver Exit SettingsSubmenu.”3. From the DRIVER EXIT SETTINGS submenu,turn the tune/select knob to scroll to STOREEXIT SETTINGS and press in the knob.Two beeps will sound to confirm that your newexit settings are saved.4. Repeat the procedure for a second driver byprogramming the other driver number.2-81
