The cruise control buttonsare located on the left sideof the steering wheel.I (On/Off): Press to turn the system on or off.The indicator light on the button turns on when cruisecontrol is on.+ RES (Resume/Accelerate): Press to make thevehicle accelerate or resume to a previously set speed.SET − (Set/Coast): Press to set the speed or makethe vehicle decelerate.[ (Cancel): Press to cancel cruise control withouterasing the set speed from memory.Setting Cruise ControlCruise control will not work if the parking brake is set, orif the master cylinder brake fluid level is low.The cruise control light on the instrument panel clustercomes on after the cruise control has been set tothe desired speed.{ CAUTION:If you leave your cruise control on when you arenot using cruise, you might hit a button and gointo cruise when you do not want to. You could bestartled and even lose control. Keep the cruisecontrol switch off until you want to use cruisecontrol.1. Press the I button.2. Get up to the desired speed.3. Press the SET− button located on the steeringwheel and release it.4. Take your foot off the accelerator.CTS Shown, CTS-VSimilar3-14
