Approach LightingThis feature allows you to select whether or not tohave the exterior lights turn on briefly during low lightperiods after unlocking the vehicle using the RemoteKeyless Entry (RKE) or keyless access transmitter.Press the customization button until Approach Lightingappears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:Off: The exterior lights will not turn on when you unlockthe vehicle with the transmitter.On (default): If it is dark enough outside, the exteriorlights will turn on briefly when you unlock the vehiclewith the transmitter.The lights will remain on for 20 seconds or until the lockbutton on the transmitter is pressed, or the vehicle isno longer off. See Remote Keyless Entry (RKE) SystemOperation on page 2-6 and Keyless Access SystemOperation on page 2-9 for more information.No Change: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.Factory SettingsThis feature allows you to set all of the customizationfeatures back to their factory default settings.Press the customization button until Factory Settingsappears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scrollthrough the following settings:Restore All (default): The customization features willbe set to their factory default settings.No Change: The customization features will not be setto their factory default settings.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.3-76