Remote Door Lock FeedbackThis feature allows you to select the type of feedbackyou will receive when locking the vehicle with the RemoteKeyless Entry (RKE) or keyless access transmitter,or when the vehicle is automatically locked using theKeyless Locking feature. You will not receive feedbackwhen locking the vehicle with the transmitter if the doorsare open. See Remote Keyless Entry (RKE) SystemOperation on page 2-6, Keyless Access SystemOperation on page 2-9, or “Keyless Locking” laterin this section for more information.Press the customization button until Remote DoorLock appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:Off: There will be no feedback when you press the lockbutton on the transmitter.Lights Only: The exterior lamps will flash when youpress the lock button on the transmitter.Horn Only: The horn will sound on the second press ofthe lock button on the transmitter.Horn & Lights (default): The exterior lamps will flashwhen you press the lock button on the transmitter, andthe horn will sound when the lock button is pressed againwithin five seconds of the previous command.No Change: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.3-74
