Keyless LockingIf the vehicle has the keyless access system,this feature allows you to select whether the doorsautomatically lock during normal vehicle exit. Whenthe ignition is turned off and all doors become closed,the vehicle will determine how many keyless accesstransmitters remain in the vehicle interior. If at leastone keyless access transmitter has been removedfrom the interior of the vehicle, the doors will lock afterseveral seconds.For example, if there are two keyless accesstransmitters in the vehicle and one is removed, theother will be locked in. The keyless access transmitterlocked in the vehicle can still be used to start the vehicleor unlock the doors, if needed. A person approachingthe outside of the locked vehicle without an authorizedkeyless access transmitter, however, will not be ableto open the door, even with a transmitter in the vehicle.See Keyless Access System Operation on page 2-9for more information.You may temporarily disable the keyless locking featureby pressing the door unlock switch for three secondson an open door. Keyless locking will then remaindisabled until a door lock switch is pressed or untilthe power mode transitions from the off power mode.To select whether the horn sounds or the lights flashwhen the vehicle is locked, see “Remote DoorLock” earlier in this section.Press the customization button until Keyless Lockingappears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scrollthrough the following settings:Off (default): The keyless locking feature will bedisabled.On: The keyless locking feature will be enabled.The doors will automatically lock several secondsafter you turn the ignition off, remove a keyless accesstransmitter from the interior of the vehicle, and close allof the doors.No Change: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.3-77
