Easy Exit RecallThe control for this feature is located on the driver doorpanel between buttons 1 and 2.With the vehicle in P (Park), the exit position can berecalled by pressing the exit button. You will heara single beep. The driver seat will move back, and if thevehicle has the power tilt wheel and telescopic steeringfeature, the power telescopic steering column willmove up and forward.If the easy exit seat feature is on in the DIC, automaticseat and power telescopic steering column movementwill occur when the key is removed from the ignition.See “EASY EXIT RECALL” under DIC VehicleCustomization on page 3-86 for more information.Further programming for automatic seat and steeringwheel movement can be done using the DriverInformation Center (DIC). You can select or notselect the following:• The easy exit recall feature• The memory seat recall featureFor programming information, see DIC VehicleCustomization on page 3-86.Power Reclining SeatbacksThe seats have powerreclining seatbacks. Usethe vertical power seatcontrol located on theoutboard side of the seat.• Press the control toward the rear of the vehicle torecline the seatback.• Press the control toward the front of the vehicle toraise the seatback.1-8
