Manual Operation9 (Off): Turns the entire climate control system off.Outside air still enters the vehicle and is directed tothe floor. The airflow direction and temperature canbe adjusted, as indicated below.If the temperature is adjusted while the system is off,the display will light to show the current settings.w x (Driver’s Temperature Controls): Press theup or down buttons next to the fan control to manuallyincrease or decrease the temperature inside the vehicle.w x (Passenger’s Temperature Controls):Press the up or down buttons next to the air deliverymode control to manually increase or decrease thetemperature for the front passenger. If the passengerclimate control system is off, pressing one of thesebuttons turns it on.9 (Fan Control): Turn clockwise or counterclockwiseto increase or decrease the fan speed. Turning thiscontrol completely counterclockwise will turn on theautomatic fan operation. If the airflow seems lowwhen the fan speed is at the highest setting, thepassenger compartment air filter may need to bereplaced. See Passenger Compartment Air Filteron page 3-48.Air Delivery Mode Control: Turn clockwise orcounterclockwise to change the current airflow mode.Select one of the following:AUTO: Turns on the automatic delivery mode operation.F (Vent): Air is directed to the instrument paneloutlets.* (Bi-Level): Air is divided between the instrumentpanel and the floor outlets. In automatic operation,cooler air is directed to the upper outlets and warmerair to the floor outlets.7 (Floor): Air is directed to the floor outlets with someair directed to the side window outlets and the windshield.If recirculation is selected, it only stays on forthree minutes to reduce windshield fogging.W (Floor/Defog): This mode clears the windows of fogor moisture. Air is directed to the floor outlets, with someair going to the side window outlets and windshield.When selected, the system turns off recirculation andruns the air conditioning compressor unless the outsidetemperature is at or below freezing. The recirculationmode cannot be selected while in the floor/defog mode.3-42