Foreign materials such as calcium chloride and othersalts, ice melting agents, road oil and tar, tree sap, birddroppings, chemicals from industrial chimneys, etc.,can damage the vehicle’s finish if they remain onpainted surfaces. Wash the vehicle as soon as possible.If necessary, use non-abrasive cleaners that are markedsafe for painted surfaces to remove foreign matter.Exterior painted surfaces are subject to aging, weatherand chemical fallout that can take their toll over a periodof years. To help keep the paint finish looking new, keepthe vehicle garaged or covered whenever possible.Protecting Exterior Bright Metal PartsBright metal parts should be cleaned regularly to keeptheir luster. Washing with water is all that is usuallyneeded. However, chrome polish may be used onchrome or stainless steel trim, if necessary.Use special care with aluminum trim. To avoid damagingprotective trim, never use auto or chrome polish, steam orcaustic soap to clean aluminum. A coating of wax, rubbedto high polish, is recommended for all bright metal parts.Windshield and Wiper BladesClean the outside of the windshield with glass cleaner.Clean the rubber blades using a lint free cloth or papertowel soaked with windshield washer fluid or a milddetergent. Wash the windshield thoroughly whencleaning the blades. Bugs, road grime, sap, and abuildup of vehicle wash/wax treatments may cause wiperstreaking. Replace the wiper blades if they are worn ordamaged.Wipers can be damaged by:• Extreme dusty conditions• Sand and salt• Heat and sun• Snow and ice, without proper removal5-91
