To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.REMOTE DOOR UNLOCKThis feature allows you to select the type of feedbackyou will receive when unlocking the vehicle with theRemote Keyless Entry (RKE) transmitter. You will notreceive feedback when unlocking the vehicle with theRKE transmitter if the doors are open. See RemoteKeyless Entry (RKE) System Operation on page 2-5for more information.Press the customization button until REMOTE DOORUNLOCK appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:LIGHTS OFF: The exterior lamps will not flash whenyou press the unlock button on the RKE transmitter.LIGHTS ON (default): The exterior lamps willflash when you press the unlock button on the RKEtransmitter.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.DELAY DOOR LOCKThis feature allows you to select whether or notthe locking of the vehicle’s doors will be delayed.When locking the doors with the power door lock switchand a door is open, this feature will delay locking thedoors until five seconds after the last door is closed.You will hear three chimes to signal that the delayedlocking feature is in use. The key must be out of theignition for this feature to work. You can temporarilyoverride delayed locking by pressing the power doorlock switch twice or the lock button on the RKEtransmitter twice.Press the customization button until DELAY DOORLOCK appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:OFF: There will be no delayed locking of the vehicle’sdoors.ON (default): The doors will not lock until five secondsafter the last door is closed.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.3-89
