You might need to manually disable or cancel thehigh-beam headlamps by turning the low-beamheadlamps on, if any of the above conditions exist.Disabling and Resetting IntelliBeam™ atthe Rearview MirrorIntelliBeam can be disabled by using the controls on theinside rearview mirror.AUTO 3 (On/Off): Press this button on the insiderearview mirror to disable the system. The IntelliBeamindicator turns off and does not come back on untilthe IntelliBeam button is pressed again.When IntelliBeam has turned on the high-beams, pull orpush the high-beam stalk. This will disable IntelliBeam.The IntelliBeam indicator on the mirror turns off. To turnIntelliBeam back on, press the IntelliBeam button on themirror.A different sensitivity setting is available for dealer/retailer diagnostics. This is done by pushing and holdingthis button for 20 seconds until the IntelliBeam indicatorlight flashes three times. If you accidentally activate this,the vehicle’s setting automatically is reset when theignition is turned off and then on again.Cleaning the IntelliBeam™ Light SensorThe light sensor is locatedon the inside of the vehiclein front of the insiderearview mirror.Clean the light sensor window, periodically, using glasscleaner on a soft cloth. Gently wipe the sensor window.Do not spray glass cleaner directly on the surface of thesensor window.Wiper Activated HeadlampsThis feature activates the headlamps and parking lampsafter the windshield wipers are turned on and havecompleted eight wipe cycles within four minutes.When the ignition is turned to LOCK/OFF, thewiper-activated headlamps immediately turn off.The wiper-activated headlamps also turn off if thewindshield wipers are turned off.3-32