Black plate (49,1)Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-7707476) - 2015 - crc - 9/5/14Seats and Restraints 3-49If the child restraint has the LATCHsystem, see Lower Anchors andTethers for Children (LATCHSystem) on page 3-40 for how andwhere to install the child restraintusing LATCH. If a child restraint issecured in the vehicle using asafety belt and it uses a top tether,see Lower Anchors and Tethers forChildren (LATCH System) onpage 3-40 for top tether anchorlocations.Do not secure a child seat in aposition without a top tether anchorif a national or local law requiresthat the top tether be anchored, or ifthe instructions that come with thechild restraint say that the top strapmust be anchored.In Canada, the law requires thatforward-facing child restraints havea top tether, and that the tether beattached.If the child restraint or vehicle seatposition does not have the LATCHsystem, you will be using the safetybelt to secure the child restraint inthis position. Be sure to follow theinstructions that came with the childrestraint. Secure the child in thechild restraint when and as theinstructions say.If more than one child restraintneeds to be installed in the rearseat, be sure to read Where to Putthe Restraint on page 3-39.1. Put the child restraint onthe seat.If the head restraint interfereswith the proper installation of thechild restraint, the head restraintmay be removed. See “HeadRestraint Removal andReinstallation” under LowerAnchors and Tethers forChildren (LATCH System) onpage 3-40.2. Pick up the latch plate, and runthe lap and shoulder portions ofthe vehicle's safety belt throughor around the restraint. The childrestraint instructions will showyou how.3. Push the latch plate into thebuckle until it clicks.Position the release button onthe buckle so that the safety beltcould be quickly unbuckled ifnecessary.
