Black plate (3,1)Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-7707476) - 2015 - crc - 9/5/14Lighting 6-3on to indicate the IntelliBeam isreactivated. See HeadlampHigh/Low-Beam Changer onpage 6-3 or Flash-to-Pass onpage 6-3.The high beams may not turn offautomatically if the system cannotdetect another vehicle's lampsbecause of any of the following:. The other vehicle's lamps aremissing, damaged, obstructedfrom view, or otherwiseundetected.. The other vehicle's lamps arecovered with dirt, snow, and/orroad spray.. The other vehicle's lamps cannotbe detected due to denseexhaust, smoke, fog, snow, roadspray, mist, or other airborneobstructions.. The vehicle's windshield is dirty,cracked, or obstructed bysomething that blocks the viewof the light sensor.. The vehicle is loaded such thatthe front end points upward,causing the light sensor to aimhigh and not detect headlampsand taillamps.. Driving on winding or hilly roads.The high-beam headlamps mayneed to be disabled if any of theabove conditions exist.This feature can be turned on or offin vehicle personalization. SeeVehicle Personalization onpage 5-39.Headlamp High/Low-Beam ChangerPush the turn signal lever awayfrom you and release to turn thehigh beams on. To return to lowbeams, push the lever again or pullit toward you and release.This indicator light turns on in theinstrument cluster when thehigh-beam headlamps are on.Flash-to-PassThe flash-to-pass feature works withthe low beams or Daytime RunningLamps (DRL) on or off.To flash the high beams, pull theturn signal lever all the way towardyou, then release it.Daytime RunningLamps (DRL)DRL can make it easier for others tosee the front of your vehicle duringthe day. Fully functional DRL arerequired on all vehicles first sold inCanada.
