Black plate (7,1)Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-7707476) - 2015 - crc - 9/5/14Keys, Doors, and Windows 2-7Programming without aRecognized TransmitterIf there are no currently recognizedtransmitters available, follow thisprocedure to program up to eighttransmitters. This feature is notavailable in Canada. This procedurewill take approximately 30 minutesto complete. The vehicle must be offand all of the transmitters you wishto program must be with you.1. Insert the vehicle key of thetransmitter into the key lockcylinder on the driver doorhandle and turn the key,counterclockwise, to the unlockposition five times within10 seconds.The Driver Information Center(DIC) displays REMOTE LEARNPENDING, PLEASE WAIT.2. Wait for 10 minutes until the DICdisplays PRESS ENGINESTART BUTTON TO LEARNand then press the ENGINESTART/STOP button.The DIC displays will againshow REMOTE LEARNPENDING, PLEASE WAIT.3. Repeat Step 2 two additionaltimes. After the third time allpreviously known transmitterswill no longer work with thevehicle. Remaining transmitterscan be relearned during the nextsteps.The DIC display should nowshow READY FOR REMOTE# 1.4. Place the new transmitter intothe transmitter pocket. Thetransmitter pocket is inside thecenter console storage areabetween the driver and frontpassenger seats. The storagearea will need to be opened andthe storage tray lifted up toaccess the transmitter pocket.5. Press the ENGINE START/STOP button. When thetransmitter is learned the DICdisplay will show that it is readyto program the next transmitter.
