1-8 In BriefPress the top or bottom of thecontrol (A) to increase or decreasesupport in the seat cushion bolsters.Press the top or bottom of thecontrol (C) to increase or decreasesupport in the seatback bolsters.See Lumbar Adjustment onpage 3‑7.Memory FeaturesOn vehicles with the memorypackage, memory buttons 1 and 2on the driver door are used to saveand recall memory settings for thedriver seat cushion and seatback,outside mirrors, and the steeringcolumn position, if the vehicle isequipped with the power tilt andtelescopic steering column.1: Saves and recalls for driver 1.2: Saves and recalls for driver 2.S : Moves the driver seat and/orpower steering column to the exitposition. See “Exit Recall” later inthis section for more information.Storing Memory PositionsTo save into memory:1. Adjust the driver seat, outsidemirrors, and the power steeringcolumn, if equipped, to thedesired driving positions.2. Press and hold “1” until twobeeps sound.3. Repeat for a second driverusing “2”.To recall memory positions, pressand release “1” or “2”. The vehiclemust be in P (Park) for an automatictransmission, or the parking brakemust be applied for a manualtransmission. A single beep willsound when the button is pressed.The seat, outside mirrors, and/orpower steering column will move tothe position previously stored for theidentified driver.If entry/exit recall is programmed onin the vehicle personalization menu,automatic entry recall occurs whenthe ignition is turned on.See “Memory Seat, Mirrors andSteering Column” under Power SeatAdjustment on page 3‑4 andVehicle Personalization onpage 5‑45 for more information.Exit RecallS : Press to move the driver seatand/or power steering column,if equipped, to the exit position.A single beep sounds when the exitfeature activates. The vehicle mustbe in P (Park) for an automatictransmission, or the parking brakemust be applied for a manualtransmission.
