VEHICLE CARE 255How to Inspect the Engine AirCleaner/FilterDo not start the engine or have theengine running with the engine aircleaner/filter housing open. Beforeremoving the engine air cleaner/filter,make sure that the engine air cleaner/filter housing and nearby componentsare free of dirt and debris. Remove theengine air cleaner/filter. Lightly tapand shake the engine air cleaner/filter(away from the vehicle), to releaseloose dust and dirt. Inspect the engineair cleaner/filter for damage, andreplace if damaged. Do not clean theengine air cleaner/filter orcomponents with water orcompressed air.To inspect or replace the air cleaner/filter:2.0L L4 Engine (LTG) Shown, 3.6LV6 Engine (LGX) Similar1. Remove the screws on top of theair cleaner/filter cover.2. Lift the air cleaner/filter coveraway from the air cleaner/filterhousing.3. Pull out the air cleaner/filter.4. Inspect or replace the aircleaner/filter.5. Reverse Steps 1–3 to reinstall theair cleaner/filter cover.3.6L V6 Engine (LF3)1. Lower Air Duct Clamp2. Lower Electrical Connector3. Upper Air Duct Clamp4. Upper Electrical Connector5. Screws1. Disconnect the lower and upperoutlet ducts by loosening thelower (1) and upper (3) air ductclamps.2. Disconnect the lower (2) andupper (4) electrical connectorsand wiring attachments to aircleaner/filter cover.
